NT ENTERPRISE SERVER

Q1. There are 5 NT servers and 150 Workstations at a single location. You 
want to centralize control of accounts and all network resources. Which
directory service will you use?
a)	Single domain
b)	Single master domain
c)	Multiple master domain
d)	Complete trust
Ans. A

Q2. Your university has 75000 users and is located in different buildings in
the campus. You want to centralize user accounts. Also you want to allow each
department to manage its own users access to information. Which model will
you choose?
a)	Single domain
b)	Single master domain
c)	Multiple master domain
d)	Complete trust
Ans. C

Q3. You want to transfer your user accounts, files and permissions from 
NetWare server to NT server. What must you have to accomplish this?

a)	TCP/IP on both servers.
b)	NetBEUI protocol on both.
c)	FAT partition on NT server.
d)	NTFS partition on NT server.
Ans. D

Q4. Your network has 3 NT servers in single domain. There is one PDC and 2 
BCD�s. You are migrating files and user accounts on more than one of the 
NetWare server computers.
You want each user to have only one account in NT domain. You do not want 
existing user accounts on NT domain to be overwritten during migration.
What must you do to ensure that the user accounts are migrated according to requirement?

a)	Migrate all user accounts and then delete duplication.
b)	Select OVERWRITE in DUPLICATE NAMES dialogue box.
c)	Migrate user accounts one at a time using User Manager for Domain.
d)	Create a mapping file to specify how user accounts information is transferred.
Ans. D

Q5. You are configuring an NT server computer to function as a LAN-TO-LAN IP
router. You want server computer to recognize other routers when they are 
are added to or removed from the network. Which service must be installed?

a)	SAP agent
b)	DHCP relay agent
c)	RIP for internet protocol
d)	RIP for NWLink IPX/SPX compatible protocol.
Ans. C

Q6. There are two domains CORP and EAST. CORP domain is located in the local
network. EAST domain is located in another city. The two domains are not 
interconnected.
You attempt to install NT on anew computer that will be used as BDC in EAST 
domain. You are doing this installation at your corporate office. During 
installation process, you receive message � Domain Controller for this can 
not be found�. What must you do to complete the installation and configure 
the server as BDC in EAST domain?

Ans. Stop installation process. Physically connect to network in EAST, then perform the installation.


Q7. There are 6 SCSI hard disks, out of which one is the system disk and other five are configured as strip set with parity. After a power outage and 
reboot 2 out of five disks failed in the strip set with parity. What should 
do you do recover?
Ans. Create strip set with parity across 5 hard disks and then restore from 
tape backup.

Q8. NT server is configured with 6 SCSI hard disks. One hard disk is system 
disk and five are configured as stripe set. After a power outage your server
 reboots and you discover one out of five on stripe set has failed. You 
replace the hard disk. What else?
Ans. Restore from tape backup.

Q9. There are two domains SALES and SUPPORT. A user Mary is promoted to the 
full sales position and you add her account to the SalesRep global group in 
SALES domain. Mary reports that she can not access the REPAIR share, which is
 located on a FAT partition on a server in SUPPORT domain. 
EXHIBIT
   1) Network Configuration	SUPPORT trusts SALES
   2) Access through share permissions
             SALES domain				SUPPORT Domain
             USER:  Mary 				Local group: Technical 
             Global group: SalesRep			(Members: SALES\SalesRep)
             (Member: Mary)
 	Global group: SalesUsers			Local group: SupUsers
	(Member: Mary)				(Members: SALES\SalesUsers)

Access through share REPAIR
	Owner
	Name
	SupUsers         :    No Access
	Technical         :    Full Control

a)	Remove Mary from SALES\SalesRep global group
b)	Remove Mary from SALES\SalesUsers global group
c)	Assign Mary Full Control to REPAIR share
d)	Configure SALES to trust SUPPORT
Ans.  B

Q10.  You use DLC protocol to connect an NT server to the network connected 
Printing Device. You have just reset printing device and now you can not 
print. What is the most likely cause of problem?
Ans. Another computer on network has connected to the printing device by 
using DLC protocol and selected continuous connection.

Q11. Your NT server computer has two hard disks. These hard disks are 
configured as SCSI ID0 and SCSI ID1 on a single host adapter. The hard disks 
are mirrored and each hard disk is formatted with single NTFS partition. One
 of the hard disk is just failed. You replace that and what else must you do 
to recover?
a)	Choose establish mirror in Disk Administrator
b)	Choose Break Mirror in Disk Administrator and then choose Regenerate
c)	Choose Break Mirror in Disk Administrator and then establish mirror
d)	Wait for NT to regenerate the mirror
Ans. A

Q12. You are experiencing system error on NT computer. Microsoft Online technical Support has requested a dump of system memory to a file. You have configured a system-paging file on your boot partition that is larger than total amount of system RAM. How should you configure the NT to generate the dump file?
a)	Configure Eventlog service to start automatically
b)	Configure Dr. Watson for NT to create a crash dump file
c)	Configure system recovery to write an event in system log.
d)	Configure system recovery to write debugging information to  %systemroot%\memory.dmp
Ans. D

Q13. All hard disks on NT computer are formatted with NTFS. After rebooting the server, you receive message OS Loader V4.00 
                Windows NT couldn�t start because of following file is missing or corrupt
	 \system32\ntoskernal.exe
	Please install a copy of the above file.
What should you do to reboot the server?
a)	Reinstall NT
b)	Reformat the drive with FAT partition
c)	Perform Emergency repair process
d)	Restore the missing file fro the tape backup
Ans. C

Q14. You are installing new NT network. New users will contain the home 
directories for half of the users on the network. You will use User Manager 
for Domain to set the location of home directories. Which environment 
variable will simplify the task?
Ans. %username%

Q15. You have 7 domain controllers. All user accounts and group are 
maintained in CORP. you want to log changes that are made to the domain 
directory database. What should you select in the Audit Policy dialogue box?
Ans.  User and Group management

Q16. You want to specify system policy that specifies network access setting for all NT workstations in the domain. You use System Policy Editor to define these settings and save them to a file NTCONFIG.POL
What must you do to activate these policies?
a)	Use User Profile Tab of the system option in control panel to specify the path where policy files will be located.
b)	Create a system default profile that contains a shortcut to the direction that contains the policy file.
c)	Save policy file in the path specified for each user�s profile dir.
d)	Save the policy file in Netlogon shared dir in the PDC.
Ans. D

Q17. You want to make changes to the registry of all NT workstations in your network to reflect settings for custom in house applications. You will use system policy editor that specifies these settings.
What else you must do to be able to create Policy file that contains the custom setting?
a)	Import registry key for NT workstation that contains the settings into system policy editor.
b)	Import INI file that contains the application settings into system policy editor.
c)	Create a system policy template file that contains the registry settings.
d)	User registry editor to copy and paste registry settings from an NT Workstation into system policy editor.
Ans. C

Q18.  You are installing Print Device that is attached directly to the 
network by Ethernet adapter. All output to this printer device will be 
managed by NT server. This print device will be used by Payroll department to
 print employee�s cheques only.
You want to provide security so that only users who submit the print job can 
control it. You do not want network administrators to be able to modify print
 jobs that are waiting to be printed. How should you provide this?

Ans. 1) Remove all existing permissions, except those assigned to the Creator
 Owner Special Group.
2)	Assign Manage document�s permission to Creator Owner Group.
3)	Create a group Payroll �..
4)	Assign print permission to payroll group.

Q19. You need to create roaming user profile for a group of user accounts. 
You do not want users to be able to modify their profiles. You log on with a
 new user account that will serve as template and make modifications to each 
user profile. You copy the profile to each user�s profile directory. What 
else to make these profiles active?
Ans. Rename NTUSER.DAT file to NTUSER.MAN in each user directory.

Q20. Ann is a member of Domain user, Temp and Marketing group. Permissions 
are set on PRIVDATA directory as shown
	Access through share permissions

		Directory                      PRIVDATA
		Domain users               Read
		Marketing	        Change
		Temp		        No access
Which permission will be applied to Ann for PRIVDATA directory?

Ans. No Access



Q21. You want to create a database measurement information that will serve 
for later analysis of NT server network. Which tools can be used to collect 
data? (Choose all that apply)
a)	MS Excel
b)	Response probe
c)	Performance monitor
d)	Network monitor
Ans. A & C

Q22. You want to gather information about NT server. How should you create a
 baseline of system performance?
Ans. Collect data during representative production and non-production hours
 so that comparison can be made with later activity.

Q23. You establish a baseline of NT computer that serves as file and print 
server for shared network application. Using performance monitor you select 
counter that display disk input output status. From another computer you 
perform a number of file access entries to generate disk status. However in 
Performance monitor all disks counters remains at zero. What is the most 
likely cause of problem?
Ans. The Diskperf-y command was not used on the server.

Q24. There is one PDC, 3 BCD�s and 5000 clients. PDC also function as WINS 
server for the network. PDC is primarily used for authentication purpose. How
should you optimize?
Minimum memory used
Balance memory used
Maximum throughput for file applications
Maximum throughput for network application
Ans. Select on Maximum throughput for network application

Q25. NT server network has grown rapidly during last several months. Recently
users started slow server response.
You use Performance monitor to view status on all domain controllers in your 
domain. You notice that Logon/sec counter for the server object is extremely 
high on all of the domain controllers during the first two hours of the 
workday. What can you do to decrease load on domain controllers?
Ans. Add one or more additional domain controllers.

Q26. You are using NT 4.0 Network Monitor on NT server network. All computers
use TCP/IP with DHCP and WINS. You capture 800 packets. You want to view only
 packets that were sent to the server by a specific computer on the network 
during capture period. How to configure?

Ans. Configure display filter to filter by address


Q27. You are installing new NT server on your single domain network. You do 
not want this server to validate user accounts logon requests. You do not 
want specific user accounts and groups from this domain to be permitted to 
use certain shared resources on the server. How ?
Ans. As a Member server that has joined the domain.

Q28. You want to allow users who log on from NT Workstation computer that is not a member of any domain to access resources on servers in the SALES 
domain. How can you do this? (Choose two)
a)	Enable Guest account in the SALES domain.
b)	Create a duplicate user account on SALES domain for each Windows NT 
Workstation user account that requires access to resources in the SALES domain.
c)	Make user accounts on the NT Workstation as a member of appropriate 
group in SALES domain
d)	Create a duplicate group account for each group on NT Workstation.

Ans. A & B

Q29. Company uses Single Master Domain with 5 domains. Each domain is located
 in different city. Each location is connected to master domain by 56Kbps 
Frame relay link.
Users often experience delay when logging on from computers that are located 
on resources domain because of congestion on 56Kbps link.
Exhibit
What should you do?
Ans. Place a BDC from Master Domain at each resource domain.